RESIDENTIAL • CONNECTED SMART HOME

Connected Living | A Whole-Home Control4 Upgrade

A refined residential technology upgrade integrating Control4 automation, dedicated cinema, multi-room entertainment, lighting, comfort and outdoor living.

Project Story

Blutek Peter Wiles Kenthurst 71 scaled

This established residence is presented in earlier BLUTEK project material as a comprehensive smart-home technology upgrade. The work described includes refreshing Control4 controllers, improving audiovisual infrastructure and optimising the network that supports the connected home.

The project story spans a dedicated cinema, everyday living spaces, outdoor entertaining and pool-house areas. Its aim is to bring the technology together around a more familiar, intuitive control experience without intruding on the architecture.

Previous BLUTEK copy also identifies custom lighting scenes for artwork, climate and motorised systems, and security. The original job sheet is not currently available, so the product models and specific integrations described below remain subject to confirmation against the installation record.

PROJECT SCOPE

Control4 Automation

Cinema & Home AV

Lighting Scenes

Outdoor Entertainment

Climate & Motorisation

Security & Networking

Blutek Peter Wiles Kenthurst 93 scaled
Blutek Peter Wiles Kenthurst 71 scaled

One intelligent experience across the residence

Rather than treating each room as a separate technology installation, the earlier project notes describe a coordinated Control4 upgrade spanning entertainment, lighting, environmental comfort and security. The home theatre and outdoor entertaining areas are distinctive elements in a wider connected-home story.

BLUTEK’s approach centres on suitable system architecture, intuitive control interfaces and clean integration with the built environment. Exact as-installed equipment and programming outcomes remain unverified until the original scope or handover record is recovered.

PROJECT OVERVIEW

Technology designed into the home

The best whole-home automation is considered from the perspective of the people living with it. This residence combines multiple internal and outdoor spaces where entertainment, lighting and comfort should feel connected rather than fragmented.

Earlier project documentation describes a Control4 controller refresh and improvements to AV and network infrastructure. This case study explains the intended experience without inventing equipment lists or quantitative outcomes.

CONTROL4 INTEGRATION

Consistent, intuitive control across spaces

The previous project write-up identifies an upgraded Control4 automation platform and 8-inch in-wall touchscreens. These provide a general picture of the control strategy, but the actual controller models, touchscreen generation, quantities and programmed scenes have not been verified from a job sheet.

A connected-home design can bring compatible devices together for simplified room control and scene-based interactions. The available records indicate this was the aim of the project; specific features depend on the installed system.

Control4 platform

Previously documented system upgrade across the home.

8-inch touchscreens

Previously mentioned fixed interfaces; models and quantities to be verified.

Room-based control

Compatible AV and home systems considered as a coordinated experience.

Programming

Scenes and routines tailored around supported connected equipment.

HOME THEATRE

Cinema as a centrepiece of connected living

The existing project copy identifies a dedicated theatre with a Paradigm Surround 1 speaker system and Row One Evolution cinema recliners, alongside Control4 touchscreen control. These product names are preserved as previously documented references, not independently verified installed items.

The available material does not establish the projector, screen, AV processor, subwoofer models or channel layout, so the updated case study does not attribute unsupported specifications.

OUTDOOR ENTERTAINMENT

Connected audio and comfort beyond the living room

Earlier BLUTEK copy describes alfresco and pool-house entertaining, identifying Paradigm Stylus 470 on-wall speakers and Paradigm P80R in-ceiling speakers. It also references electric heaters, ceiling fans and water-feature integration.

The design intent is to make outdoor spaces a natural extension of the home. The exact installed speaker quantities, heating controls, automation triggers and pool-system interfaces require confirmation.

Paradigm Stylus 470

Previously named outdoor on-wall speaker model.

Paradigm P80R

Previously named in-ceiling speaker model.

Alfresco comfort

Heaters and fans mentioned in earlier integration notes.

Outdoor systems

Water features and pool-house functions previously referenced, subject to verification.

LIGHTING & ARCHITECTURE

Lighting scenes that complement art and interiors

Previous project descriptions place special emphasis on lighting scenes created to showcase artwork and architectural features. Well-considered lighting control can help give different living spaces their own atmosphere while keeping operation straightforward.

Without the installation schedule, we cannot identify the specific fixtures, dimming modules or lighting-control hardware. The revised story focuses on the design objective rather than unsupported product claims.

EVERYDAY COMFORT

Climate, motorised elements and security

The earlier case study references integrated air-conditioning, skylight blinds, electric windows, sliding doors and perimeter security. Bringing compatible comfort and access systems into a cohesive interface was part of the documented project direction.

Motorised equipment and security systems require specialist controls and appropriate safety and access settings. Their manufacturers, quantities, exact integrations and remote capabilities are not confirmed in the available records.

NETWORK FOUNDATION

Connectivity behind the smart-home experience

The earlier BLUTEK project story refers to network and connectivity optimisation as part of its automation upgrade. For a large residence, consistent connectivity matters across living areas, cinema, outdoor zones and the supporting control platform.

Router, switch and access-point models are not documented in the copy currently available. Those will be added to the product register only if confirmed by the original job sheet or installation records.

PRODUCT REFERENCES

Equipment identified in earlier project material

The following are **provisional research references**, not a confirmed inventory. They come from an earlier project write-up, because the original job sheet is not yet available.

Control4

Whole-home automation platform and 8-inch in-wall touchscreens; exact models and counts unknown.

Paradigm Surround 1

Theatre speaker-system reference requiring model and configuration verification.

Row One Evolution

Cinema seating range mentioned in the earlier project copy.

Paradigm Stylus 470 / P80R

Outdoor and in-ceiling speaker references requiring installation confirmation.

BLUTEK’S APPROACH

Seamless technology, considered design

This project illustrates the breadth of a whole-home technology brief: automation, a dedicated theatre, outdoor entertaining, lighting, climate, motorised equipment, security and networking.

The case study will remain labelled for internal scope verification until the original proposal, job sheet or handover record is available. This protects the accuracy of BLUTEK’s portfolio and future product catalogue.

Project Gallery

Explore the residence, home cinema, entertaining spaces and discreet technology integration. Photography is retained from the existing project gallery while equipment records are reconciled.

Planning a similar project?

Talk to Blutek about creating a seamlessly integrated smart home, home theatre or technology solution tailored to your project.